30 September 2015 - The Electrical Inspection Unit is notifying all electricians that effective October 5 all drawings must be available, when applying for mechanical ‘roughin’ inspections.
The unit says drawings must be available for the electrical inspector to accurately determine the square footage of the building in order to carry out a ‘roughin’ inspection.
This is in accordance with the statutory instruments 1999 NO.46 BVIE Ordinance (Cap 277) which states, “A consumer who intends to construct, extend or carry out works on a building of 1000 sq. ft. or more total floor space and 100 Amps or more service, shall submit for the approval of the Inspector, a copy of the electrical drawings for the building.”
Electricians applying for an initial inspection must present a detailed panel directory with the electrical inspection form at the time of scheduling the inspection.
This panel directory should consist of the following information:
• Owner/Agent
• Address
• Electrician/Contractor
• Main Breaker size, Phase type, Main Conductor size
• Mega Ohms
• Panel Number/Name - This information should be in a table format
• Circuit Breaker (Number, Amps, Pole, Wire size, REG breaker, GFCI breaker)
• Location
• Lights
• Switches
• Fans
• REG Outlets
• GFCI outlets
• AC Units
Failure to adhere to these requests would result in penalties.
For more information please contact the unit at telephone number 468-3603 or 468-3604.
*************************
DISCLAIMER
This article was posted in its entirety as received by SKNVibes.com. This media house does not correct any spelling or grammatical error within press releases and commentaries. The views expressed therein are not necessarily those of SKNVibes.com, its sponsors or advertisers
British Virgin Islands News